Fuel Cap November 18th, 2007
The last step before starting work on the right fuel tank is the fuel cap. The cap flange has a slight bend in it to conform to the shape of the leading edge. It took a while to get it to line up. Once I had a good match, I used some C-clamps to hold it in place while I drilled the holes.
Then, on the bottom side, I made a little bracket that will hold the vent tube when it is finally fitted in.
And that’s it for now….I’ll start work on the right tank, which will hopefully be just a boring repeat of the left tank. So, no pictures for a while.