Tank Access Plate   November 9th, 2007

After a long break due to some work travel, I’m back in business. The fuel tank rib at the end of the tank has an access plate, where the fuel pickup is located. The hole for this plate has to be drilled out. The hardest part of this was just finding the center of the hole. Once I lined things up in the drill press, it was just a matter of holding on, clenching my teeth, and letting the fly-cutter do its thing.

The result is a nice clean hole…

This entry was posted on Friday, November 9th, 2007 at 3:47 am and is filed under Tanks. You can follow any responses to this entry through the RSS 2.0 feed.Both comments and pings are currently closed.

No Responses