Matching the Tank and Leading Edge   September 23rd, 2007

In order to make sure the fuel tank and the leading edge match up as perfectly as possible, I assembled the baffle and tank skin on the spar (with no ribs), and moved it up to mate up with the leading edge. When they matched nicely, I drilled the baffle to the first two Z-brackets and put clecoes in.

I then removed the skin and drilled the rest of the baffle/Z-bracket holes.

Not too many pictures of this process; I have been busy helping with stuff around the house, and decided to focus my free time on building and not so much picture taking.

This entry was posted on Sunday, September 23rd, 2007 at 1:43 am and is filed under Tanks, Wings. You can follow any responses to this entry through the RSS 2.0 feed.Both comments and pings are currently closed.

No Responses