Back to working on the Vertical Stabilizer   May 1st, 2006

After finishing and hanging the Hstab on the wall, I went back to the Vertical Stabilizer. I spent about an hour taking it apart (I had last match drilled the skin to the skeleton) and deburring some of it.

Since the lower section of the rear spar needs flush rivets, I dimpled the spar and countersunk the reinforcement bar.

This entry was posted on Monday, May 1st, 2006 at 1:58 am and is filed under Empennage, Vertical Stabilizer. You can follow any responses to this entry through the RSS 2.0 feed.Both comments and pings are currently closed.

No Responses